If you have a central or hydronic heating system it is important to ensure that it is cleaned regularly. Over time radiators will begin to rust internally and they then create a black sludge which blocks the pipes and valves.
So how do you know if your system needs cleaning? Do any of the descriptions below sound familiar?
Your radiators need to be bled frequently
The radiators are colder at the bottom than at the top
The heating system takes a long time to warm up
The boiler is getting noisier
Some rooms are colder than others
Then there is a good chance that you heating system requires cleaning. AJ’s plumbing provide a cleaning and flushing service, using the most up to date technology. We use flushing equipment to loosen the rust and the sludge which is then flushed out of the radiators. The water is then checked to make sure it is clean.
Once your system has been cleaned you will begin to notice the benefits immediately, including lower bills from using less energy and better distribution of heat in your radiators and rooms. You will also have extended the life of your heating system.
So give us a call now on 1300 76 53 39 to arrange an appointment to get your heating system cleaned and flushed. We service the Sydney area and surrounding suburbs.
REMS Electric filling and flushing unit
AJ’s Plumbing use the top of the range REMS flushing products. REMS is the leading manufacturer of machines and tools for the pipe working. Detailed below are a couple of the products that we use.
REMS Solar-Push K 60
Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch. High transport volume ≤ 36 ltr/min for fast filling, efficient flushing and venting of closed systems and for filling tanks. For continuous load ≤ 60°C.
Pumping capacity at 40 m vertical pumping height 16 ltr/min, pumping volume ≤ 36 ltr/min, pumping pressure ≤ 5.5 bar/0.55 MPa/80 psi, temperature of the pumped substance (constant use) ≤ 60°C, pH value of the pumped substance 7 – 8
REMS Solar-Push I 80
Dry self-priming impeller pump with special impeller, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condensor moto, 1000 W, on/off switch. High transport volume ≤ 27 ltr/min for fast filling, efficient flushing and venting of closed systems and for filling tanks. With pressure relief valve for easy release of pressure in the pressure hose after completion of the job. For continuous load ≤ 80°C.
Pumping capacity at 40 m vertical pumping height 18 ltr/min, pumping volume ≤ 27 ltr/min, pumping pressure ≤ 6.5 bar/0.65 MPa/94 psi, temperature of the pumped substance (constant use) ≤ 80°C, pH value of the pumped substance 7 – 8
For Professional & Reliable Service Call 24/7 Full Heating and Plumbing Services